Hardware Specification of EL3000
Typical power consumption:	12V / 1 A
Dimension:	190(L) x 120(W) x 50(H) (measured in mm)
Colour:	Blue and Silver
Communication output:	26-bit Wiegand, 40-bit Free Wiegand
Status indication:	by Blue LED and buzzer
Card reading range:	between 2 and 5 cm
LCD display:	2 x 16 characters
Keypad:	4 x 4
Temperature Operation Range:	-20°C and 70°C
RF frequency:	3.56 MHz

Hardware Specification of EL3z Remote I/O Relay Module
Typical power consumption:	12V / 200 mA
Dimension (without casing):	110(L) x 65(W) x 15(H) (measured in mm)
Communication:	SPI bus
Input and Outputs:	4-Input (non-supervise) and 6-Output
Status indication:	by LED
Temperature Operation Range:	-20°C and 70°C

Hardware Specification of EL38 Communicator
Typical power consumption:	12V / 150 mA
Dimension (without casing):	105(L) x 65(W) x 15(H) (measured in mm)
Communication:	RS232 and Full Duplex RS485
Status indication:	by LED
Temperature Operation Range:	-20°C and 70°C
Softkey ready

Hardware Specification of EA918 Mifare Personalization Terminal
Typical power consumption:	12V / 150 mA
Dimension (without casing):	105(L) x 65(W) x 15(H) (measured in mm)
Communication:	RS232 and Full Duplex RS485
Status indication:	by LED and buzzer
Temperature Operation Range:	-20°C and 70°C
Card reading range:	between 2 and 5 cm
RF frequency:	13.56 MHz
Rockey ready
Related software:	Mifare Personalization

	Compact, Secure and Scalable
	Fingerflex comes with three models: EL3000E -EM Compatible proximity card reader EL3000H -HID proximity card reader EL3000M MIFARE contactless smart card reader EL3000M eliminates fingerprint template storage on controller, where 2-dimensional complete fingerprint image and personal information are stored in the Mifare smart cards. With this, finger presented to the scanner will be matched against template from the card. Only ELID Mifare Smart Card can communicate with Fingerflex reader to prevent any smart card from being granted access. YES! Card theft or database protection is no longer an issue and the number of users to the system application is scalable to your requirement. Not only does the availability of Fingerflex models offer flexible access methods suited to your preference (card or card & finger verification), and required security, it can also be integrated either to a security control suite of software and/or to a clocking management system. You can have a one-stop access control and time management solution to meet your basic security and HR requirements.
	Wide Application Environment
	Its application is suitable to isolated highly secured areas in highly populated campuses, institutions and medical centers, single or multiple premises and single locale or geographically distributed premises.
	Option to Packaged Supporting Devices
	Objective Supporting Devices Description Remote protection and I/O controls EL3Z FingerFlex Remote I/O Relay Module As a protecting device for door from sabotage by direct tampering on EL3000 and as an extension I/O board of EL3000 with 4 zones alarm (non-supervised) and 6 output points Local Interface communication EL38 Communicator A mediating communication device for data transmission between PC and EL3000 controllers for a networked configuration, using serial cabling RS232 to PC and RS485 to EL3000 Same locale networking EL78 Terminal Server A mediating communication device between PC and EL3000 controllers for a networked configuration on an ETHERNET LAN system Geographically distributed networking EL5000 A mediating controller that would ease LAN / WAN system Personalizing Cards EA918 Mifare Personalization Terminal A Mifare card encoding device, supporting from standard 8Kbit up to 64Kbit Mifare smart card. An example to a typical 8K-bit Smart Card would include the usage of 48 bytes space for card encoding, 528 bytes for finger templates and 176 bytes of personal data. The terminal is also able to program Mifare Readers for the purposes of card reading format. It comes with software
	Model Relative to Card Reader
	EL3000E EM Compatible proximity card reader EL3000H HID proximity card reader EL3000M MIFARE contactless smart card reader
	Date Storage Capacity
	Number of Master Users to administer device: 10 Number of Fingers for enrollment: 2
	Model Fingerprint Template Storage Number of users No of transactions EL3000E Controller 2,000 or 4,000 12,000 EL3000H Controller 2,000 or 4,000 12,000 EL3000M Controller 2,000 or 4,000 12,000 EL3000M Card 10,000 12,000
	Method of Access
	Access Methods (Combinable) 1 2 3 4 5 Finger Print * * * Proximity Card * * Mifare Smart Card * *
	There are several options available to its method of application or configuration: (1) As a stand-alone device (2) Networked with direct connection a local PC control station (3) Networked on a LAN / WAN for widely distributed system (4) Networked on a LAN for multiple premises of a same locale
	General Functions of the Controller
	Function Description User Enrollment Card and Fingerprint Enrollment and Deletion Finger Print Recognition accuracy Recognition accuracy can be determined by selectable verification levels to Fingerprint enrollment and by selectable matching threshold Card reading Settings for card reading include format, offset, length and size Communication Communication facilities include encryption for transmitting finger print template, and access transaction data, unit number settings, baud rate and connectivity tests Accessibility settings Settings for Date /Time, Holidays, Timers (24 sets) and Time Zones (10 sets) General access controls Controls to door such as lock release duration for each access, sensor and alarm output controls, application of push button or out reader, access inhibition, pulse lock release, and the application of anti-pass back Preview of transactions Selectable viewing transaction range Power saving Adjustable duration to LCD lighting (or backlit) when controller is at use