Access Controller
el5030 p2    EL5030L
  Hybrid based Networked Access System
  EL5030L is an all new powerful hybrid based networked access controller designed to give the user the most flexible and cost effective access control design to meet any building requirement. It can operate in a fully centralized topology, field design topology or hybrid type topology making it the most desirable controller to use and specify.
  orange button4 Replaces the standard EL5030 firmware with a firmware dedicated to lift control
  orange button4 Supports up to 8 EFD32s
  orange button4 Maximum of 64 Floors
  orange button4 Configurable to work on 3 or 5 or 8 access portals
  orange button4 Large database of 15,000 card users and 25,000 offline transactions
  orange button4 Card database upgradable to an astonishing 300,000 card users
  orange button4 Reader support: Magnetic, Bar Code, EM/HID Proximity, Mifare, Biometric Devices
  orange button4 32-bit-low-power and high performance microprocessor
  orange button4 Peer-to-peer communication with other EL 5000 series controller for data sharing intelligence
  orange button4 Multi-function; Standard Access Mode/Car-Park control/Time clocking –Late reasoning mode
  orange button4 Enhanced Anti-passback capabilities ( Hard/Soft/Alarm)
  orange button4 Support an expansion slot for future-proof requirements
  orange button4 40 holidays set; 99 timezones with 99 timers with 4 time intervals
  orange button4 Built in tamper alarm, battery low, AC fail


Model EL5030L
Manufacturer ELID Sdn Bhd
Country of Origin Malaysia
Microprocessor 32-bit 386EX running at 25 MHz
Card Users 12000
Transactions 25000
Memory 2MB RAM
Access Modes Card
Standalone Operation YES
Real-Time Scanning YES
Tamper Detection YES
Display 2x16 Character
Connectivity TCP / IP, RS485
No of RS485 BUS 1 (2 with EB2)
Access Applications Lift Access
Max. Lifts Supported 4 Lifts
Type of Readers Supported Barcode, Magnetic, Proximity, Smart Cards, Biometrics, Touch Memory
Max. Readers Supported 8 (4 IN and 4 OUT Readers)
Max. RIU Supported 4 units of ER502 or 2 units of ER505
Max. EFD Supported 8 units of EFD32 (with EB2)
Operating Temperature 0oC to 60oC
Humidity 10% to 90% non-condensing
Power Requirements 12VDC with 1.5 Amp Charger
Casing Dimensions 410 (H) x 400 (L) x 120 (W) mm
Approximate Weight 5kg with Casing and Power Supply
Approximate Weight 600gm without Casing and Power Supply


EL5030L- Lift Access Configuration
EL5030L Lift Access Configuration

Add-On Boards

 EB2 p   EB2
  Bus Board 
  orange button4Enables Bus2 of EL5030 Controllers
  orange button4Connects to EFD32 & EFD80