OEM Readers
Specification
Product | ||
Product Code | SBGMACF01 | |
Description | C28 Face recognition with temperature detection, 7" display, 30K faces | |
OS | Embeded Linux system | |
Screen | ||
Size | 7” IPS infinity display | |
Luminance |
450 Lux | |
Resolution | 1024 x 600 | |
Ratio | 9 : 16 | |
Camera | ||
Resolution |
2.0MP (1920 x 1080) | |
Sensor |
1/2.7” low illumination CMOS sensor | |
Lens | HD F ixed 3.9mm (F2.2) | |
White Balance | Auto , low color temp, high color temp, Manual | |
WDR | D-WD R & Real WDR | |
LED | RGB (Natural Light) & IR LED | |
Temperature Detection | ||
Temperature measurement range |
30ºC ~ 45ºC | |
Temperature measurement distance | 0.15M ~ 0.4M | |
Temperature measurement accuracy | ±0.3ºC | |
Voice Alert | Abnormal Temperature Alarm | |
Face Detection & Capture | ||
Detection Angle | Tilt: 9 0 degree ; Pan: 53 degree | |
Face library | 30,000 face library | |
1 : N Face R ecognition | ≤ 0.2s/person, the recognition accuracy is greater than 99%, under the condition of error rate of 0.03% | |
Stranger detection | Support | |
Identify distance | 0.3m -2.0m | |
Identification Parameter Setting | Black and white list, detection sensitivity, comparison threshold, area protection, face frame switch | |
Port | ||
Network | 10/100M Network adaptive, RJ45 interface | |
Audio | 1 audio output | |
Serial | RS232 serial | |
Relay output | 1 Relay Out | |
Wiegand | Bare wire, * (D0, D1, GND) support wigan 26, 34, 3 (D0, D1, GND) | |
Reset | Bare wire, 2* (short reset: restore s factory Settings) | |
General | ||
Power | DV12±30% | |
Power Consumption | ≤ 20W | |
Work Temp. & Humidity | Temp.: -30ºC to +70ºC humidity: 10 to 90% RH (Optional heater at low temperature) | |
Level of Protection | IP67, IK08, 8KV Surge protection | |
Install Type | Turnstile installation, wall mounte d installation | |
Size (mm) | 248.3mm (L) x 126.9mm (W) x 26 .6mm (Thickness) |