Barrier Gate/ Turnstile
 
smart flap barrier s2   Elid Smart Flap Barrier EGF-1088
  Flap Barrier
 

ELID Smart Flap Gate is a high-end gate system that meets the requirements of large corporate buildings, hotels, subway stations, and clubs, with its elegant design. 

The ELID Smart Flap Gate can keep track of the visitor and staff entering a building, ensuring only authorized user
are able to enter restricted areas.

  orange button4 Alarm function - When arms are pushed by force illegally, alarm will be triggered automatically and arms will be set to lock.
  orange button4 The flap gate will close immediately when somebody tries to enter the gate illegally, (e.g. tailgating or going the opposite direction).
  orange button4 Gate remains in lock mode until open signal is received.
  orange button4 Automatic Reset Functions: After a pedestrian has swapped the card and does not pass the gate during the specified time (system default is 10 secs), the system will automatically cancel the pedestrian’s authority to pass the gate. (reset time is between 1-60 secs can be adjusted). Meet fire protection needs.
  orange button4 The turnstile can link to all brands of door access control system and biometric recognition system.
  orange button4 The turnstile is bidirectional (pedestrian can enter and exit from the same gate/lane).
 

Diagram

smart flap barrier diagram

Specification

Housing material 304# stainless steel
Working voltage AC220±10%V 50±10%HZ
Drive motor DC24V brush motor
Size 1400mm (L) * 310mm (W) * 1000mm (H)
Thickness of the 304 material 2.00 mm
Passage width 550mm
Direction single or bi-directional (optional)
Working environment indoor/outdoor (with a roof) -10°C~70°C
Relative humidity ≤90% coagulation free
Time of opening/closing 0.6 second
Pass speed 25-30 persons/min (open/close)
Time to work after power on 3 seconds
Reset time after break down 10 seconds
Normal running life 3 million opening
Communication interface standard RS485 interface, distance ≤1200m
Input interface +12V level signal or pulse width>100ms 12V pulse, drive current>10mA