 |
Elid Folding Arm Barrier Gate EBG-300F | |
| Barrier Gate | ||
|
The EBG 300F range of automatic arm barrier are designed to operate from single phase AC 240-volt power supply and logic controller, ensuring the arm has a smooth consistent operations during each cycle. Our automatic barriers have been carefully designed and require minimum maintenance, giving efficient operation and long-term reliability. The barrier is designed for use in a wide range of commercial, retail, public and private car park applications.. |
||
 Wheel manual release. In case of power failure, rotate the wheel for manual release at the bottom of the motor to raise the boom manually. When power on, the motor will work normally. |
||
| Die-casting aluminium alloy motor, precise and good thermal radiation. |
||
| Simple and reliable, crank and rod structure. |
||
| Digital limit switches (photo electricity limit switch and motor memory sensor). |
||
| Auto-retract on hitting obstacle. |
||
| Auto-closing based on timer control. |
||
| Support the infrared photocell for anti-bumping function (optional). |
||
| Supports external and internal vehicle loop detector (optional). |
||
| Wire control “up/down” or remote control. |
||
| Access control. |
||
| Arm “open/close” can be interface with all access control system. |
Specification
| EBG 300F-23 | EBG 300F-33 | |
| Speed | 3 sec |
|
| Arm Type | 90° folding | 180° folding |
| Max Arm Length | 3M | |
| Arm Dimension | 45°100MM |
|
| Voltage | AC220V±10% |
|
| Frequency | 50/60HZ |
|
| Power Consumption | 200W |
|
| Humidity | ≤90% |
|
| Working Temperature | -35°C~+60°C |
|
| Housing Dimension (W*D*H) | 335*285*925MM |
|
| Enclosure Rating | lP54 |
|
| MTBF | 2,000,000 times |
|
| Weight | 40KG |
|